EasyManua.ls Logo

DeWalt DXAELJ16CA - Important Notes

DeWalt DXAELJ16CA
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
8
WARNING – To reduce the risk of injury:
Follow these instructions and
those published by the battery manufacturer and manufacturer of any equipment you intend to use with
this unit. Review cautionary markings on these products and on engine.
INTRODUCTION
Congratulations on purchasing your new Lithium Jump-Starter / Power Bank. Read this
Instruction Manual and follow the instructions carefully before using this unit.
IMPORTANT NOTES:
Several factors can affect a jump-starter’s ability to boost a
vehicle’s battery, including, but not limited to the size of the
battery, the temperature (hot or cold), whether the battery is
damaged or defective, and whether the jump-starter itself is fully
charged.
The jump-starter requires a minimum voltage to detect the
correct connection before it will begin to boost. If the vehicle
battery voltage is below approximately 2 volts, it may not be able
to detect connection and may not be able to start the vehicle.
While this low battery voltage is rare it may occur under extreme
conditions.