DeWalt DXPW3835 - Installation; Pressure Washer Assembly; Chemical and Electrical Safety

10
English
WARNING: RISK OF CHEMICAL BURN
WHAT CAN HAPPEN HOW TO PREVENT IT
• Use of acids, toxic or
corrosive chemicals,
poisons, in sec ti cides, or any
kind of flam ma ble solvent
with this product could re sult
in se ri ous injury or death.
• Do not spray ac ids, gasoline,
ker o sene, or any other
flammable materials with this
product. Use only household
de ter gents, cleaners and
degreasers recommended
for use with pres sure
washers.
• Wear pro tec tive clothing
to protect eyes and skin
from con tact with sprayed
materials.
WARNING: RISK OF ELEC TRI CAL SHOCK
WHAT CAN HAPPEN HOW TO PREVENT IT
• Spray di rect ed at elec tri-
cal outlets or switch es, or
ob jects con nect ed to an
elec tri cal circuit, could re sult
in a fatal electrical shock.
• Unplug any elec tri cal ly
op er at ed product before
attempting to clean it. Direct
spray away from electric
out lets and switches.
WARNING: RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN HOW TO PREVENT IT
• Serious injury can result
from attempting to lift too
heavy an object.
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others before lifting.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
INSTALLATION
Pressure Washer Assembly (Fig. 1)
1. Slide the handle assembly (O) onto the frame (F).
F
O
CAUTION: Risk of personal injury. Avoid placing
hands between handle and frame when assembling
to prevent pinching.
2. Align holes in the top handle (R) with the
mounting holes in the handle assembly (O).
3. Insert saddle bolts (DD) through aligned holes
and secure top handle to handle assembly with
knobs (EE). Tighten until snug.