How to fix a DeWalt DXV20P Vacuum Cleaner when the motor does not run?
If the motor of your DeWalt Vacuum Cleaner does not run, check the power cord, plugs, and outlet. Also, make sure that the on/off switch is in the ON position (I).
Why is the suction capacity of my DeWalt DXV20P Vacuum Cleaner decreasing?
If the suction capacity of your DeWalt Vacuum Cleaner decreases, try the following: * Replace the disposable dust bag. * Check that the nozzle, extension wands, and hose are properly installed. * Empty the dust tank, referring to the instructions on how to empty the tank.
Why does dust come out while vacuuming with my DeWalt Vacuum Cleaner?
If dust comes out while you are vacuuming with your DeWalt Vacuum Cleaner, check that the filter is properly installed and replace it if necessary. Also, ensure that all connections are secure.
What to do if my DeWalt DXV20P stops running?
If your DeWalt Vacuum Cleaner stops running, it may be due to a tripped thermal overload. To resolve this: 1. Turn off the vacuum and disconnect it from the power source. 2. Empty the dust tank, if necessary. 3. Allow the unit to cool down. 4. Plug the power cord into an appropriate outlet and turn the on/off switch to the ON position (I) to test.
General| Model | DXV20P |
|---|---|
| Category | Vacuum Cleaner |
| Voltage | 120V |
| Cord Length | 20 ft |
| Hose Length | 7 ft |
| Wheels | Yes |
| Drain | Yes |
| Blower Port | Yes |
| Hose Diameter | 38 mm |
To Next Page
