DeWalt XR DCD996 - Safety Guidelines and Definitions; Hazard Signal Word Definitions; General Power Tool Safety Rules

English
5
Batteries
Chargers/Charge Times (Minutes)
Cat #
V
DC
Ah
Weight
(kg)
DCB104
DCB107
DCB112
DCB113 DCB115 DCB116 DCB117
DCB546
18/54
6.0/2.0
1.05
60
270
170
80
40
DCB547
18/54
9.0/3.0
1.46
75*
420
270
110*
60
DCB548
1.44
120
540
350
DCB181
0.35
22
70
45
60/45**
60/40**
DCB182
18
4.0
0.61
60/40**
185
120
100
DCB183/B/G
18
2.0
0.40
30
90
60
DCB184/B/G
18
5.0
0.62
75/50**
240
150
75
DCB185
18
1.3
0.35
22
60
40
22
22
22
DCB187
18
3.0
0.54
45
140
90
45
45
45
DCB189
18
4.0
0.54
60
185
120
60
60
60
*Date code 201811475B or later
**Date code 201536 or later
Definitions: Safety Guidelines c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
2) Electrical Safety
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric
shock. Denotes risk of
fire.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
below
may result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.