DeWalt XR DCF900P2T User Manual

ENGLISH
3
EC‑Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF900
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
10.03.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V Cordless Impact Wrench
DCF900
DeWALT declares that these products described under
“technical data” are in compliance with:
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (asamended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(asamended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact DeWALT at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
hands warm (relevant for vibration), organisation of
workpatterns.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
DCF900
Voltage V
DC
18
Type
1
Battery type
Li‑Ion
Power output
W 760
No load speed min
‑1
0–2300
Impact rate min
‑1
0–2200
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Nm
Nm
Nm
Nm
1396
135
813
1396
Max breakaway torque Nm 1898
Weight (without battery pack) kg
2.9
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L
PA
(emission sound pressure level)
dB(A) 92.5
L
WA
(sound power level)
dB(A) 103.5
K (uncertainty for the given sound level)
dB(A) 3
Vibration emission value a
h
=
m/s
2
15
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
18V CORDLESS IMPACT WRENCH
DCF900

DeWalt XR DCF900P2T Specifications

General

Brand	DeWalt
Model	XR DCF900P2T
Category	Power Tool
Language	English