30
ENGLISH
e ) Switch on the motor only when the hands and feet are
away from the cuttingmeans.
f ) Always disconnect the machine from the power
supply (i.e. remove the plug from the mains, remove the
disabling device or removable battery)
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the machine;
• after striking a foreign object;
• whenever the machine starts vibratingabnormally.
g ) Take care against injury to feet and hands from the
cuttingmeans.
h ) Always ensure that the ventilation openings are kept clear
ofdebris.
i ) When using the brush cutter there is a risk of
kickback if it contacts a solid object (tree trunk,
branch, or rock). The unit will kick to the opposite
direction of the brush cutter blade'srotation.
j ) Remove any objects that may cause kickback, such as
branches androcks.
k ) Check for loose fasteners and damaged parts, such as cracks in
the cuttingattachment.
Maintenance and Storage
a ) Disconnect the machine from the power supply (i.e.
remove the plug from the mains, remove the disabling
device or removable battery) before carrying out
maintenance or cleaningwork.
b ) Use only the manufacturer’s recommended replacement
parts andaccessories.
c ) Inspect and maintain the machine regularly. Have
the machine repaired only by an authorizedrepairer.
d ) When not in use, store the machine out of the reach
ofchildren.
e ) Use blade cover for metal blades during transport
andstorage.
f ) Clean before storing, including the use of guards on
cutting attachments with metalblades.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMERS / BRUSH CUTTERS
WARNING: Cutting elements continue to rotate after the
motor is switchedoff.
• Wear long trousers to protect yourlegs.
• Before using the appliance, check that your cutting path is free
from sticks, stones, wire and any otherobstacles.
• Only use the appliance in the upright position, with the cutting
line near the ground. Never switch the appliance on in any
otherposition.
• Move slowly when using the appliance. Be aware that freshly
cut grass is damp andslippery.
• Do not work on steep slopes. Work across the face of slopes,
not up anddown.
• Never cross gravel paths or roads while the appliance
isrunning.
• Never touch the cutting line while the appliance isrunning.
• Do not put the appliance down until the cutting line has come
to a completestandstill.
• Use only the appropriate type of cutting line. Never use metal
cutting line or fishingline.
• Keep hands and feet away from the cutting line and blade at
all times, especially when switching on themotor.
• Before using the appliance and after any impact, check for
signs of wear or damage and repair asnecessary.
• Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line always
return the machine to its normal operating position before
switchingon.
• Close supervision is necessary when the appliance is used
nearchildren.
• This appliance is not intended for use by young or infirm
persons withoutsupervision.
• This appliance is not to be used as atoy.
• Use in a dry location only. Do not allow the appliance to
becomewet.
• Do not immerse the appliance inwater.
• Do not open the body casing. There are not user-serviceable
parts inside
• Do not operate the appliance in explosive atmospheres, such
as in the presence of flammable liquids, gases ordust.
• When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed ordirection.
• When not in use, the appliance should be stored in a dry, well
ventilated place out of reach ofchildren.
• Children should not have access to storedappliances.
Safety of Others
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for theirsafety.
• Children must be supervised to ensure that they do not play
with theappliance.
Residual Risks
To ensure you have good footing on slopes, do not overreach.
Keep your balance at all times. Always walk, do notrun.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged useetc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any rotating/movingparts.