EasyManua.ls Logo

DeWalt XGST227CS - User Manual

DeWalt XGST227CS
112 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
769-25762 / 00 08/20
Operator's Manual
Manuel de l'utilisateur
Manual del operador
DXGST227CS | DXGST227SS
2-Cycle Trimmers
Taille-bordures à 2 temps
Desbrozadoras de 2 tiempos
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-855-971-1123

Table of Contents

Questions and Answers

  • J
    Joyce PalmerAug 3, 2025
    What to do if DeWalt Trimmer cutting head will not advance line?
    • K
      Karen LewisAug 4, 2025
      If the cutting head of your DeWalt Trimmer won't advance the line, the following issues might be the cause: * The cutting head is bound with grass. Stop the engine and clean the cutting head. * The cutting head is out of line. Refill the cutting head with new line. * The inner reel is bound up. Rewind the line. * The cutting head is dirty. Clean the inner reel and outer spool. * The line is welded. Open the cutting head and remove the welded section. * The line is twisted. Rewind the line. * Not enough line is extended. Stop the unit, push the bump knob and pull the line until 4 inches (102 mm) is outside of the cutting head.
  • A
    Aaron StephensAug 8, 2025
    What causes the cutting line to advance uncontrollably on a DeWalt XGST227CS?
    • J
      Jessica MackAug 8, 2025
      If the cutting line on your DeWalt Trimmer advances uncontrollably, it may be because there is oil, cleaner, or lubricant in the cutting head. To resolve this, clean and thoroughly dry the cutting head.
  • C
    Carolyn GonzalezAug 14, 2025
    Why won't my DeWalt XGST227CS engine start?
    • D
      dawnramosAug 14, 2025
      Several factors can prevent your DeWalt Trimmer from starting. The fuel tank might be empty, so fill it with properly-mixed fuel. You may not have pressed the primer bulb enough; press it 10 times. The engine could be flooded; if so, move the choke lever to Position B, press the throttle lockout, squeeze the throttle control, and pull the starter rope until the engine starts. The fuel might be old (over 30 days) or improperly mixed; in this case, drain the fuel tank and add fresh, properly-mixed fuel. Finally, the spark plug could be fouled, requiring a replacement.
  • S
    Sean CrossAug 18, 2025
    What to do if DeWalt XGST227CS engine lacks power or stalls?
    • D
      dianamooreAug 18, 2025
      If your DeWalt Trimmer engine lacks power or stalls, it could be due to several reasons. The fuel might be old (over 30 days) or improperly mixed, so drain the fuel tank and add fresh, properly mixed fuel. Another possibility is a dirty air filter, which you should clean or replace. Lastly, a fouled spark plug can cause this issue, and you'll need to replace it.
  • W
    William OconnorAug 23, 2025
    Why won't my DeWalt XGST227CS engine accelerate?
    • C
      christopherlambAug 25, 2025
      If your DeWalt Trimmer engine isn't accelerating, the fuel might be old (over 30 days) or improperly mixed; drain the fuel tank and add fresh, properly mixed fuel. Also, the cutting head could be bound with grass; stop the engine and clean it. Finally, a dirty air filter can cause this, so clean or replace the air filter.
  • A
    Austin OlsonAug 28, 2025
    How to fix DeWalt Trimmer engine that won't idle?
    • H
      Heather ScottAug 28, 2025
      If your DeWalt Trimmer engine won't idle, the air filter might be dirty; clean or replace it. Alternatively, the fuel could be old (over 30 days) or improperly mixed; drain the fuel tank and add fresh, properly mixed fuel. Also, the idle speed might be incorrect, so adjust it accordingly.

Summary

Safety

Spark Arrestor Requirements

Legal requirements for spark arrestors on engines in specific US states.

General Safety Instructions

Crucial instructions for safe operation and handling of the unit.

Operating Safety

Guidelines for safe operation, including PPE and unit handling.

Safety Symbols and Meanings

Explanation of safety symbols and pictographs used in the manual.

Know Your Unit

Applications

Lists the primary uses and applications of the trimmer.

Assembly Tools Required

Lists the tools needed for assembling the unit.

Specifications

Assembly

Installing the Cutting Head Shield (DXGST227 CS)

Step-by-step instructions for attaching the cutting head shield.

Installing Cutting Head Shield (DXGST227 SS)

Instructions for attaching the cutting head shield for the DXGST227SS model.

Attachments

Installing Attachments

Steps for securely attaching optional accessories to the unit's coupler.

Removing Attachments

Steps for safely detaching optional accessories from the unit's coupler.

Handle Adjustment

Installing the Handle

Procedure for attaching the main handle to the unit.

Adjusting the Handle

Steps for repositioning the handle for user comfort.

Shoulder Strap

Assembling the Shoulder Strap

Instructions for putting together the shoulder strap assembly.

Using the Shoulder Strap

How to properly wear and adjust the shoulder strap for use.

Oil and Fuel

Fuel Mixing Instructions

Guidelines for correctly mixing gasoline and oil for the engine.

Fueling the Unit

Step-by-step guide on how to safely add fuel to the unit.

Starting and Stopping

Starting Instructions

Detailed steps for starting the engine, including primer and choke use.

Stopping Instructions

How to properly turn off the engine and the unit.

Operation

Holding the Unit

Proper stance and grip for operating the unit safely and effectively.

Trimming Line Adjustment

How to release and maintain the correct length of trimming line.

Cutting Tips

Recommendations for optimizing cutting performance and efficiency.

Edging

How to use the trimmer attachment for edging tasks.

Maintenance

Maintenance Schedule

Recommended maintenance tasks and their frequency.

Replacing the Trimming Line

Step-by-step guide for installing new trimming line.

Maintaining the Air Filter

Procedure for cleaning and re-oiling the air filter for optimal performance.

Adjusting the Idle Speed

Steps to adjust the engine's idle speed for proper operation.

Maintaining the Spark Plug

Instructions for inspecting, cleaning, and replacing the spark plug.

Cleaning and Storage

Cleaning

How to clean the exterior of the unit.

Storage

Guidelines for storing the unit for short-term and long-term periods.

Troubleshooting

Engine Starting Issues

Solutions for common problems preventing the engine from starting.

Engine Performance Issues

Troubleshooting steps for low power or stalling issues.

Cutting Head Issues

Solutions for problems with the trimmer line advancement.

Warranty

Limited Warranty Details

Details of the limited warranty coverage provided by MTD LLC.

Getting Service

Steps for locating an authorized service provider and obtaining service.

Warranty Exclusions and Limitations

Lists exclusions, limitations, and conditions of the limited warranty.

DeWalt XGST227CS Specifications

General IconGeneral
BrandDeWalt
ModelXGST227CS
CategoryTrimmer
LanguageEnglish

Related product manuals