DeWalt XGST227CS - Know Your Unit; Applications; Assembly Tools Required

11
KNOW YOUR UNIT
ASSEMBLY TOOLS REQUIRED
• 5/32-inch (4 mm) Allen wrench (included)
DXGST227CS
Cutting Head
Shield
Cutting Head
Line Cutting Blade
Coupler
Upper Shaft Housing
Lower Shaft Housing
Handle
Shoulder Strap / Harness Loop
Hanger Cap
On/O Switch
Throttle Lockout
Spark Plug
Muer
Fuel Cap
Starter Rope
Grip
Shaft Grip
Throttle Control
Air Filter
Cover
Primer Bulb
Choke Lever
APPLICATIONS (AS A TRIMMER)*
• Cutting grass and light weeds.
• Edging
• Decorative trimming around trees, fences, etc.
*Other optional attachments may be used with this unit.