EasyManuals Logo

DeWalt XR Li-Ion DCD790-XE User Manual

DeWalt XR Li-Ion DCD790-XE
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,
CALL US AT: 1800 338 002 (Aust) or 0800 339 258 (NZ).
Technical Data
DCD790-XE DCD795-XE
Voltage V
DC
18 18
Battery Type Li-Ion Li-Ion
No-load speed
1st gear min
-1
0–600 0–600
2nd gear min
-1
0–2000 0–2000
Impact rate
1st gear min
-1
0–10 200
2nd gear min
-1
0–34 000
Max. torque (hard/soft) Nm 60/23 60/23
Chuck capacity mm 1.0–13.0 1.0–13.0
Maximum drilling capacity
Wood mm 38 38
Metal mm 13 13
Masonry mm 13
Weight (without battery pack) kg 1.20 1.24
L
PA
(sound pressure) dB(A)
76 90
K
PA
(sound pressure uncertainty) dB(A)
3 3
L
WA
(sound power) dB(A)
87 101
K
WA
(sound power uncertainty) dB(A)
3 3
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
Drilling into metal
a
h,D
=
m/s²
2.8 3.3
Uncertainty K = m/s²
1.5 1.5
Vibration emission value a
h
Drilling into concrete
a
h,ID
=
m/s²
23
Uncertainty K = m/s²
– 1.5
Vibration emission value a
h
Screwdriving
a
h
=
m/s²
<2.5 <2.6
Uncertainty K = m/s²
1.5 1.5
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications
of the tool. However if the tool is used for different applications, with different

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt XR Li-Ion DCD790-XE and is the answer not in the manual?

DeWalt XR Li-Ion DCD790-XE Specifications

General IconGeneral
BrandDeWalt
ModelXR Li-Ion DCD790-XE
CategoryCordless driver drill
LanguageEnglish

Related product manuals