DeWalt XR LI-ION DCN660N User Manual

DCN660
DCN661
Final Page size: A5 (148mm x 210mm)
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per DeWalt DCN660
DCN660NT-XJ o cerca il tuo prodotto tra le migliori offerte di Elettroutensili
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per DeWalt DCN660
DCN660N o cerca il tuo prodotto tra le migliori offerte di Elettroutensili

DeWalt XR LI-ION DCN660N Specifications

General

Voltage	18V
Nail Diameter	1.6 mm
Magazine Capacity	110 nails
Power Source	Battery
Tool Length	310 mm
Tool Width	95 mm
Depth Adjustment	Yes
Tool-Free Jam Release	Yes
Battery Type	Li-Ion
Magazine Angle	20 °
Firing Mode	Sequential
Nail Length	32 - 63 mm

Summary

18V XR 16 GA FINISH NAILER DCN660, DCN661

Technical Data

Provides detailed technical specifications for the DCN660 and DCN661 nailers.

Noise and Vibration Values

Details noise and vibration emission levels as per EN60745 standards.

Definitions: Safety Guidelines

Safety Symbol Definitions

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a safe and clean work area.

Electrical Safety

Precautions for safe use of electrical components and cords.

Personal Safety

Measures to ensure operator safety during tool operation.

Safety Rules for Finish Nailers

Power Tool Use and Care

Battery Tool Use and Care

Important Safety Instructions for All Battery Chargers

Troubleshooting

Tool Does Not Work

Troubleshooting steps for when the power tool does not function.

Fasteners Jam in Tool

Procedure for clearing jammed fasteners from the tool.

Incomplete Fastener Driving

Motor Runs, Tool Does Not Drive Fasteners

Troubleshooting for situations where the motor runs but fasteners are not driven.

Assembly and Adjustments

Inserting and Removing the Battery Pack

Loading the Tool

Operation

Operating Modes

Adjusting Driving Depth

Clearing a Stall or Jammed Nail

Procedure for clearing jammed nails or tool stalls.

Selecting the Mode