DeWalt XR LI-ION DCN680 Service Training

H
H
H
H
- Contents of opened battery cells may cause respiratory irritation
- Do not store or use the tool and battery pack in locations where the temperature may
reach or exceed 40 ˚C (such as outside sheds or metal buildings in summer).
- If battery contents come into contact with the skin, immediately wash the area with mild soap
and water
- If battery contents come into contact with the skin, immediately wash the area with mild soap
and water.
Safety Instruction
DO NOT attempt to charge the battery pack with any chargers other than the ones in this
manual.
Do not use an extension cord unless it is absolutely necessary
Do not operate charger with damaged cord or plug
• Always assume that the tool contains fasteners
• Do not point the tool towards yourself or anyone nearby.
• Do not actuate the tool unless the tool is placed firmly against the workpiece.
• Disconnect the battery when removing the fastener jams in the tool.
Before repair

DeWalt XR LI-ION DCN680 Specifications

General

Type	Cordless Brad Nailer
Battery Type	20V MAX Lithium-Ion
Nail Diameter	18 gauge
Magazine Capacity	110 nails
Tool-Free Jam Release	Yes
Battery Included	No
Charger Included	No
Firing Mode	Sequential
Depth Adjustment	Yes
Nail Length	5/8" to 2-1/8"
Weight	5.3 lbs (without battery)