Battery Replacement
1. If you find the receiver is working abnormally or the indicator on the
transmitter becomes dim, replace the remote battery with a new DC 12V
(type 23A) battery, making sure the polarity +/- of the battery is correct.
2. Low battery power may decrease readable wireless remote range.
05
2. Release the program button and then press the “on” or “off ”button on the
remote control.
3. Programming / paring is successful when the indicator light stops blinking.
Note:
Each set of ON or OFF button can be paired with and control several outlets;
Each outlet can be paired and controlled by multiple transmitters.
To Next Page
Loading...
General