The motion/light sensor transmitter has the following 4 modes.
Motion Detection Mode: The receiver will be on whenever
the sensor detects motion, whether in day or night.
Night Time Motion Activation Mode: When the transmitter
is in a location with poor light conditions, the receiver will
turn on once the sensor detects motion.
Random Mode: The receiver will randomly turn on and off
when the transmitter is in a location with poor light
conditions.(Note: the interval between turning on/off is no
less than 10 minutes and no more than 2 hours).
Dusk to Dawn Mode: The receiver will turn on at dusk and
off at dawn. Please note the amount of light at the location
of the transmitter.
Function Introduction
PIR
NTM
D2D
RND
Function
Knob Switch
DC 5V power supply port
Please use a power adapter with 3.5 x 1.35mm DC head
Time Delay
Dial Key
Pairing
Button
Battery
case
To Next Page
Loading...