Need help?Do you have a question about the Dewetron DEWE3-RM Series and is the answer not in the manual?
General| Resolution | Up to 24-bit |
|---|---|
| Isolation | Channel-to-channel and channel-to-ground isolation |
| Input Connectors | BNC, DSUB, LEMO |
| Data Storage | Internal SSD, external USB, network storage |
| Interfaces | Ethernet, USB, CAN |
| Power Supply | 100-240 VAC, 50-60 Hz or 10-36 VDC |
| Analog Input Voltage Range | ±10V, ±1V |
Welcome to the world of DEWETRON!
Intended use of the DEWE3-RMx series instruments.
Safety instructions that must be observed by the user.
General safety guidelines for using the system.
Electrical safety instructions for system operation.
Notices regarding ambient conditions for safe operation.
Specific safety notices during system operation.
Relevant standards and norms for the product.
Explanation of safety and warning notice conventions.
Information notices and system symbols.
Guidelines for environmental impact and end-of-life handling.
Interference issues with IT software or network processes.
Information on warranty terms for DEWETRON products.
Legal disclaimers and rights legend.
Key facts about the DEWE3-RMx data acquisition mainframe.
Detailed system specifications for DEWE3-RMx and DEWE3-PA8-RM.
Environmental operating conditions and mechanical resistance specifications.
Overview of the different DEWE3-RMx series models.
Specific details for DEWE3-RM8, RM12, RM16, and PA8-RM models.
Physical dimensions of the DEWE3-RMx and DEWE3-PA8-RM.
Internal block diagram of the DEWE3-RMx system.
Visual overview of system connections and ports.
TRION/TRION3 module slots and TRION SYNC-BUS interface.
Power button, EPAD2, USB, and SSD drive bay interfaces.
Fan cartridge, power switch, power input, and RS-232 connector.
Audio interface and optional system upgrades.
Specific ports available on the DEWE3-PA8-RM model.
LED display, sensor interfaces, and redundant sensor power supply.
Compatibility between DEWE3 chassis and TRION/TRION3 modules.
Selection of compatible sensors and transducers.
Overview of TRION series modules, including analog and digital types.
Details on TRION digital, power, and analog output modules.
Step-by-step procedure for installing a TRION module.
Information on the STAR-slot for timing and synchronization modules.
Instructions for installing 19-inch mounting brackets.
Guidelines for proper system cooling.
Information on system recovery procedures.
Operating the OXYGEN software, starting, and setting up signals.
Procedure for changing measurement channel settings.
Steps to customize and design the measurement screen.
Procedure for starting and stopping data recording.
Procedures for opening and exporting data files.
Steps to open data files for post-processing.
Steps to export data files in various formats.
Introduction to system synchronization methods.
Details on synchronizing systems using the TRION-SYNC-BUS.
Information on GPS synchronization for accurate timing.
Expanding channels using TRIONet for data transfer.
Connecting and operating multiple DEWETRON systems.
Synchronizing measurement devices with absolute time reference.
Using PTP and IRIG for precise time synchronization.
Methods for data transfer, independent of synchronization.
Using the DEWE3-RMxx/PA8-RM as a power analyzer.
Recommended service intervals for maintenance tasks.
Instructions for cleaning the system chassis and interior.
Procedure for removing and cleaning the fan cartridge.
Removing feet for control cabinet installation.
System recovery, updates, and software maintenance.
Guidance on software, training, and calibration services.
Information on obtaining support and service for the product.
Information on the repair process and obtaining spare parts.
Details on volatile and non-volatile memory types used.
Information regarding radio communication capabilities.
CE certificate of conformity for the DEWE3-RMx model.
CE certificate of conformity for the DEWE3-PA8-RM model.
Product conformity to IEC 61000-4-30 power quality standards.
To Next Page
