DEXP HLS80JS - Chapter7 Factory Mode Parameter Setting Instructions and Notes; Enter into the Factory Mode

15
Chapter7 Factory mode parameter setting instructions and notes
7-1 Enter into the factory mode
Switch on TV set, and make it works normally:
Press 【SOURCE】 key on the remote control
Press number keys “3”、“1”、“3”、“8” on remote control to enter password. Finish entering the factory mode.
If you want to quit the factory mode, Please. press【EXIT】key to exit source.
⑴
Factory menu displays as bellow：
The first menu value The second items value The third items value
ADC ADJUST MODE RGB/Ypbpr(SD)/Ypbpr(HD)/S
CART
ADC Tune Fail
R-GAIN 5159
G-GAIN 5192
B-GAIN 5206
R-OFFSET 0
G-OFFSET 0
B-OFFSET 0
Ypbpr Phase 0
Picture mode Source VGA/HDMI1/HDMI2/HDMI3/
SCART/DTV/ATV/AV/YPBPR
1
Picture mode Home/vivid/standard/mild/user
Brightness 50
Contrast 100
Color 60
Sharpness 60
Tint 50
Copy all
White balance Source VGA/HDMI1/HDMI2/HDMI3/