Dexter Power CDT214LD.U - Accessories and Components; Recommended Accessories

10
EN
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.
To reduce vibration and noise risk:
-Wear anti-vibration gloves
-Shorten trigger time
-Wear hearing protection
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may signicantly reduce the
exposure level over the total working period.
Helping to minimise your vibration and noise exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration and noise accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Li-Ion battery pack 2
Charger 1
Belt clip 1
Pla stic Raw lplu g: 5 mm*8 /6mm *8/8 mm*8 /10m m*3 27
Screw:3mm*8/4mm*8/5mm*8/6mm*3 27
25 mm Sc rewd r iver bi t s: PHILLI PS( PH0 x3/ PH1x6/ PH2 x6 /PH3 x3) 18
25mm Screwdriver bits: POZI(PZ0x3/PZ1x6/ PZ2x6/PZ3x3) 18
25mm Screwdriver bits: T10/ T15*2/ T20*4/ T25*3/T30*3/ T40* 2 15
25 mm Sc re wdr i ver bi t s: HE X(2 /2 . 5/ 3* 2 /4*2 / 5* 2 /6 * 2 / 7) 11
HSS drill bit: 1.5/2.0/2.5 /3.0/3.5/4.0/4.5/5.0/6.0 9
50 mm Sc rewd ri ver bi ts: PHIL LIP S(PH1*2/ PH2 *4/PH 3* 2) 8
25mm screwdirver bits:SLOT TED (SL3/SL 4x2/SL5 /SL6x2 /SL7x2) 8
Wood working drills bit: 3.0/4.0/5.0/6.0/7.0/8.0 6
50 m m Scre wdr ive r bit s: SLOT TED (SL 4. 5/S L5 .5 *2 /S L6. 5) 4
power nut drive: 5.0/6 .0/8.0mm 3
Al le n key: 3/4/ 5 3
50mm Magnetic bits holder 1
We recommend that you purchase your accessories from the same store that sold you the tool. Use
good quality accessories marked with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for further details. Store personnel
can assist you and offer advice.