Dexter Power CDT214LD.U - Technical Specifications; Technical Data; Noise and Vibration Information

9
EN
TECHNICAL DATA
Type CDT214LD.U(CDT -designation of machinery, representative of Cordless Drill)
NOISE AND VIBRATION DATA
A weighted sound pressure L
pA
78dB(A)
K
pA
3dB(A)
A weighted sound power L
wA
89dB(A)
K
wA
3dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used especially what kind of
workpiece is processed dependant on the following examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
Vibration total values (triax vector sum) determined according to EN 62841:
Drilling into metal Vibration emission value a
h, D
=1.909m/s²
Uncertainty K = 1.5m/s²
Voltage 14.4V
Charger input 100-240V~50/60Hz, 42W
Charger output 10.8-20V 1500mA
Charger Model ACG1815D
Battery pack model ABP1415SD
Battery capacity 1.5Ah Li-Ion
No. Of Battery cells 4
Charging time 1h
No load speed 0-350/0-1350/min
Number of clutch positions 18+1
Max torque 30 Nm
Chuck capacity 10 mm
Max. drilling capacity
Steel 10 mm
Wood 28mm
Machine weight 1.81 kg