To Next PageTo Next PageWhy does my Dexter Power Saw motor overheat so easily?
The Dexter Power Saw motor may overheat easily due to overloading or insufficient cooling. To resolve this, avoid overloading the motor while cutting and remove any dust from the motor to ensure optimal cooling.
What to do if my Dexter Power Saw motor does not work?
If the Dexter Power Saw motor isn't working, the cause may be a defective motor, cable, or plug, or open housing cover. Check the fuses and replace them if necessary. Ensure the housing cover is closed correctly. Arrange for a specialist to inspect the machine. Never attempt to repair the motor yourself as it is dangerous!
Why doesn't the Dexter Power Saw motor reach its full power?
The Dexter Power Saw motor may not reach its full power because the circuits in the network are overloaded by other equipment. Avoid using other equipment or motors on the same circuit.
How to fix a rough or wavy saw cut with my Dexter Power Saw?
A rough or wavy saw cut with your Dexter Power Saw indicates the saw blade is dull, or the tooth shape isn't appropriate for the material thickness. Resharpen the saw blade or use a more suitable saw blade.
What to do if the Dexter Power Saw blade jams during cutting?
If the Dexter Power Saw blade jams during cutting, it could be due to a blunt saw blade, deposits on the saw blade, or a poorly set guide. Change the saw blade, clean the saw blade, and set the saw blade guide according to the operating instructions.
Why does the Dexter Power Saw motor start slowly and not reach operating speed?
If the Dexter Power Saw motor starts slowly and doesn't reach operating speed, the voltage may be too low, or the coils or capacitor may be damaged. Contact the utility provider to check the voltage. Arrange for a specialist to inspect the motor and replace the capacitor.
Why do burn marks appear on the wood when cutting with my Dexter Power Saw?
Burn marks appearing on the wood during cutting with your Dexter Power Saw may be due to a blunt or wrong saw blade. Change the saw blade, and select a saw blade according to the operating instructions.
Why does the workpiece pull away or splinter when using my Dexter Power Saw?
If the workpiece pulls away or splinters when using the Dexter Power Saw, it may be due to excessive cutting pressure or an unsuitable saw blade. Insert a suitable saw blade.
Why does my Dexter Power Saw motor make excessive noise?
Excessive noise from the Dexter Power Saw motor may be due to damaged coils or a defective motor. Arrange for a specialist to inspect the motor.
How to fix a Dexter Power Saw blade that is not running straight?
If the Dexter Power Saw blade isn't running straight, it may be because the guide has been wrongly set or the wrong saw blade is being used. Set the saw blade guide according to the operating instructions and select a saw blade according to the operating instructions.
Essential safety rules for maintaining an orderly and safe work environment.
Crucial safety guidelines covering personal protection, machine operation, and hazard avoidance.
Procedures for assembling and adjusting the bandsaw table for various cutting angles.
Instructions for attaching table width enlargement and parallel stops for accurate cuts.
Step-by-step guide for safely replacing the bandsaw blade.
How to adjust upper and lower band guides for optimal blade performance and tracking.
Procedure for replacing the table insert when it becomes worn or damaged.
Instructions for using the power switch and understanding its safety features.
Guide for making straight cuts along the length of the workpiece.
Instructions for tilting the table to perform angled or miter cuts.
Techniques for cutting curves and radii with the bandsaw.
How to use the transverse cutting gauge for angled crosscuts.
Diagnosing and resolving issues related to motor starting, speed, and overheating.
Addressing problems like rough cuts, workpiece pulling, or splintering.
Correcting problems where the saw blade does not run straight.
Troubleshooting steps for when the saw blade jams during cutting.
General| Brand | Dexter Power |
|---|---|
| Model | HBS20X |
| Category | Saw |
| Language | English |
