To Next PageTo Next PageWhy does my Dexter Power MS SL 8S Saw motor overheat easily?
The Dexter Power Saw motor may overheat due to overloading or insufficient cooling. To resolve this, avoid overloading the motor during cutting tasks. Also, remove any accumulated dust from the motor to ensure optimal cooling.
Specific safety measures for handling and using saw blades.
Guidelines for safe use, storage, and replacement of batteries.
Details sound pressure, sound power, and vibration emission values.
Lists potential risks that may remain even with proper operation.
Instructions for mounting and preparing the saw machine.
Detailed steps for accurate 90-degree crosscut angle setting.
Detailed steps for accurate 45-degree mitre cut angle setting.
Guide for executing 90° crosscuts with the turntable set to 0°.
Instructions for performing crosscuts with the turntable angled.
Steps for making mitre cuts with the turntable at 0 degrees.
Guide for executing double mitre cuts with angled turntables.
Procedure for setting and checking the cutting depth.
How to attach, use, and empty the sawdust collection bag.
Detailed, safety-focused instructions for changing the saw blade.
Instructions for activating the laser and replacing its batteries.
Procedure for checking wear and replacing carbon brushes.
Identifies risks associated with damaged electrical cables and their causes.
General| Brand | Dexter Power |
|---|---|
| Model | MS SL 8S |
| Category | Saw |
| Language | English |
