Warning
1.1
Before Connecting
1)
After unpacking, please check product and packing list
fi
rst, if product is damaged or lack
of parts, please contact with the local retailer.
2)
Before installation, be sure to cut o
ff
the grid power and make sure the battery is in the
turned-o
ff
mode.
3)
Wiring must be correct, do not mistake the positive and negative cables, and ensure no
short circuit with the external device.
4)
It is prohibited to connect the battery and AC power directly.
5)
Battery system must be well grounded and the resistance must be less than 1Ω.
6)
Please ensured the electrical parameters of battery system are compatible to related
equipment.
7)
Keep the battery away from water and fire.
1.2
In Using
1)
If the battery system needs to be moved or repaired, the power must be cut o
ff
and the
battery is completely shut down.
2)
It is prohibited to connect the battery with di
ff
erent type of Battery.
3)
It is prohibited to put the batteries working with faulty or incompatible inverter.
4)
It is prohibited to disassemble the battery.
5)
In case of fire, only dry fire extinguishers can be used. Liquid fire extinguishers are forbid-
den.
6)
Please do not open, repair, or disassemble the battery except sta
ff
s from DEYE or author-
ized by DEYE. We do not undertake any consequences or related responsibility which be-
cause of violation of safety operation or violating of design, production, and equipment
safety standards.
2
Introduction
RW-M6.1 lithium iron phosphate battery is one of new energy storage products developed
and produced by DEYE, it can be used to support reliable power for various types of
equipment and systems.
RW-M6.1 is especially suitable for application scene of high power, limited installation
space and long cycle life.
RW-M6.1 has built-in BMS battery management system, which can manage and monitor
cells information including voltage, current and temperature. What’s more, BMS can
balance cells charging and discharging to extend cycle life.
Multiple batteries can connect in parallel to expand capacity and power in parallel for
larger capacity and longer power supporting duration requirements.
To Next Page
Loading...
Need help?
General
