2.1
Product Features
1)
The whole module is non-toxic, non-polluting, and environmentally friendly.
2)
Cathode material is made from LiFePO4 with safety performance and long cycle life.
3)
Battery management system (BMS)has protection functions including over-discharge,
over-charge, over-current and high & low temperature.
4)
The system can automatically manage charge and discharge state and balance current and
voltage of each cell.
5)
Flexible configuration, multiple battery modules can be in parallel for expanding capacity
and power.
6)
Adopted self-cooling mode rapidly reduced system entire noise.
7)
The module has less self-discharge, up to 6 months without charging it on shelf, no
memory effect, excellent performance of shallow charge and discharge.
8)
Battery module communication address auto networking, easy maintenance, support re-
motely monitoring and upgrade the firmware.
9)
High-power density: flat design, wall-mounted and floor-mount, saving installation space.
2.2
Product Overview
This section details the front and side panel of the interface functions.
RW-M6.1 Product Interface
To Next Page
Loading...
Need help?
General
