Need help?Do you have a question about the Deye SUN-12K-SG01LP1-AU-AM3 and is the answer not in the manual?
General| Model | SUN-12K-SG01LP1-AU-AM3 |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 12 kW |
| Max. DC Input Power | 15.6 kW |
| Max. PV Input Voltage | 1000V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 26A |
| Nominal AC Output Power | 12 kW |
| Max. AC Output Power | 13.2 kW |
| Nominal AC Voltage | 230V |
| AC Voltage Range | 180-280V |
| AC Output Frequency | 50/60 Hz |
| Max. AC Output Current | 57.4A |
| Battery Voltage | 48V |
| Topology | Transformerless |
| Protection Class | IP65 |
| Communication | RS485 |
| Protection | DC Reverse Polarity Protection, Overvoltage Protection, Islanding Protection |
| Operating Temperature Range | -25°C to 60°C |
Visual warnings and their meanings for safe operation and handling.
Detailed diagram and labeling of the inverter's components and ports.
Technical drawings showing the physical dimensions of the inverter unit.
Lists key functionalities and operational capabilities of the hybrid inverter.
Illustrates typical system configurations and connected devices.
Guidelines for regular inspection and cleaning to ensure optimal performance.
Details all items included in the inverter package for installation.
Precautions and conditions for safe and effective physical mounting of the inverter.
Step-by-step instructions for safely connecting the battery to the inverter.
Explains the purpose and pin assignments of various inverter ports.
Illustrates how to connect the temperature sensor for lead-acid batteries.
Procedures for connecting the inverter to the grid and backup load safely.
Guidelines for safely connecting photovoltaic modules to the inverter.
Criteria for choosing appropriate PV modules based on voltage and tracker requirements.
Detailed steps for connecting PV module wires to the inverter input connectors.
Instructions for connecting Current Transformers (CTs) for monitoring and control.
Diagram for connecting a CHNT meter for system monitoring and data acquisition.
Essential steps for grounding the inverter to prevent electric shock.
Illustrates different wiring configurations for grid-tied and other system types.
Shows a system diagram for integrating a diesel generator with the inverter.
Instructions for turning the inverter unit on and off correctly.
Overview of the inverter's front panel indicators, keys, and LCD display.
Details of the main screen interface, showing system status and energy flow.
Visual representation of navigation within the inverter's LCD menu system.
Displays daily, monthly, and yearly solar power generation data and trends.
Shows power generation and consumption curves for solar, load, and grid.
Access point for configuring various system parameters and settings.
Options for setting time, date, display dimming, and factory reset.
Configuration options for battery type, capacity, charging, and discharging parameters.
Table of recommended voltage and torque settings for different battery types.
Allows selection of different operating modes like Selling First, Zero Export, etc.
Settings for grid connection parameters, standards, and protection.
Step-by-step guide for initial setup and configuration of grid connection.
Selecting the appropriate grid code and parameters for regional compliance.
Configuration for using the generator port for various input and output functions.
Access to specialized functions like Solar Arc Fault, DRM, and Backup Delay.
Displays inverter ID, firmware versions, and recorded alarm codes.
To Next Page