Need help?Do you have a question about the Deye SUN-16K-SG01LP1 and is the answer not in the manual?
General| Model | SUN-16K-SG01LP1 |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 16000 W |
| Max. PV Input Voltage | 1100 V |
| Number of MPPT Trackers | 2 |
| Max. Input Current per MPPT | 26 A |
| Output Frequency | 50/60 Hz |
| Battery Voltage | 48 V |
| Topology | Transformerless |
| Protection Degree | IP65 |
| Operating Temperature | -25°C to 60°C |
| Weight | 45 kg |
| Max. Output Power | 17600 W |
| Max. PV Input Power | 20000W |
| Nominal AC Voltage | 230V |
| Communication | CAN/RS485 |
Highlights critical safety warnings and symbols for inverter operation and handling.
Guides on proper inverter mounting, site selection, and environmental considerations.
Details the procedure and requirements for connecting the battery to the inverter.
Covers connecting the inverter to the grid and backup load terminals.
Details the procedure for connecting photovoltaic modules to the inverter.
Shows the wiring diagram for connecting multiple inverters in a single-phase parallel configuration.
Details the wiring for three-phase parallel connection of multiple inverters.
Explains the functions of the inverter's display panel, indicators, and keys.
Covers detailed settings for grid connection parameters, protection, and frequency adjustments.
Lists inverter error codes, their descriptions, and recommended troubleshooting steps.
To Next Page