Need help?Do you have a question about the Deye SUN-3.6K-SG03LP1-EU and is the answer not in the manual?
General| Model | SUN-3.6K-SG03LP1-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3.6 kW |
| Max. DC Input Voltage | 500V |
| Start-up Voltage | 150 V |
| Number of MPPT Trackers | 2 |
| Max. Input Current per MPPT | 11 A |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Rated AC Frequency | 50/60Hz |
| Max. Output Current | 16 A |
| THDi | <3% |
| DC Switch | Yes |
| Protection | IP65 |
| Cooling | Natural Convection |
| Battery Type | Lithium-ion |
| Battery Voltage Range | 40-60V |
| Protection Class | IP65 |
| Max Output Power | 3.6 kW |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485 |
| Max Efficiency | 97.6% |
Visual identification of inverter components and ports.
Key functionalities and capabilities of the hybrid inverter.
Diagram illustrating the inverter's integration into a typical system.
Enumeration of components included in the inverter package.
Guidelines and precautions for physically installing the inverter.
Steps and safety for connecting the battery to the inverter.
Procedures for connecting AC power sources and loads.
Instructions for connecting solar PV modules to the inverter.
Criteria for choosing compatible PV modules.
Connecting Current Transformer for monitoring and control.
Essential grounding procedure for electrical safety.
Guide for configuring the Wi-Fi module for monitoring.
Overall wiring diagram for system connections.
Diagram for connecting multiple inverters in a single-phase system.
Diagram for connecting multiple inverters in a three-phase system.
Instructions for turning the inverter on and off.
Overview of the inverter's front panel controls and indicators.
Explanation of the primary display interface and its information.
Visual guide to navigating the inverter's LCD menus.
Display of solar generation data over time.
Visual data on solar, load, and grid power trends.
Access point for various system configuration settings.
Core settings for time, date, and display.
Configuration options specific to battery management.
Settings for defining operational modes like selling or self-consumption.
Settings related to grid connection parameters and standards.
Configuration for using the generator port.
Advanced settings for peak-shaving and other features.
Access to inverter identification and version information.
Description of the basic operational mode.
System configuration for wind turbine integration.
System configuration for generator integration.
System configuration for smart load management.
System configuration for on-grid inverter operation.
Technical specifications for battery connection and performance.
Technical specifications for PV module input.
Technical specifications for AC power output.
Performance metrics of the inverter's efficiency.
Safety features and protection mechanisms integrated into the inverter.
List of compliance standards and certifications achieved.
General operating parameters and physical characteristics.
To Next Page