Need help?Do you have a question about the Deye SUN-3K-SG03LP1-EU and is the answer not in the manual?
General| Model | SUN-3K-SG03LP1-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 3000 W |
| Max. DC Input Power | 3900 W |
| Max. DC Input Voltage | 500V |
| Number of MPPT Trackers | 2 |
| Number of MPPT | 2 |
| Max. Input Current per MPPT | 11 A |
| Max. Input Current | 22 A |
| Nominal AC Output Power | 3000 W |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| AC Output Voltage | 230 V |
| Max. AC Input Current | 16 A |
| Max. Output Current | 13 A |
| THDi | <3% |
| AC Grid Frequency Range | 50/60Hz |
| AC Output Frequency | 50/60Hz |
| Battery Voltage Range | 40-60V |
| Max. Charging Current | 50A |
| Max. Discharging Current | 50A |
| Efficiency | 97.6% |
| Protection Degree | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485 |
| Max. AC Output Power | 3300 W |
Detailed illustration and labeling of the hybrid inverter's front and rear components.
Instructions for safely connecting the battery bank to the inverter, including cable specifications.
Procedures for connecting the inverter to the grid and backup load, with cable and breaker recommendations.
Guidelines for connecting photovoltaic (PV) modules to the inverter, including cable and safety requirements.
Access point to various system configuration settings, including battery, grid, and work modes.
Configuration options for time synchronization, beep settings, auto-dim, and factory reset.
Settings for configuring battery capacity, charging current, and battery type.
Options to configure operating modes like Selling First, Zero Export, and Grid Peak Shaving.
Parameters for configuring grid connection standards, voltage, frequency, and protection settings.
To Next Page