Need help?Do you have a question about the Deye SUN-6K-SG03LP1-EU and is the answer not in the manual?
General| Model | SUN-6K-SG03LP1-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 6kW |
| Max. DC Input Power | 7800 W |
| Number of MPPT | 2 |
| Start-up Voltage | 150 V |
| Max. Input Current per MPPT | 13 A |
| Max. AC Output Power | 6kW |
| AC Voltage Range | 180-280V |
| Power Factor | 0.8 leading to 0.8 lagging |
| THDi | <3% |
| AC Grid Frequency Range | 50/60Hz |
| Battery Voltage Range | 40-60V |
| Max. Charging Current | 120 A |
| Max. Discharging Current | 120 A |
| Protection Degree | IP65 |
| Peak Efficiency | 97.6% |
| Cooling Method | Natural Convection |
| Rated AC Voltage | 230 V |
| Communication | RS485 |
| Operating Temperature Range | -25°C to +60°C |
| Efficiency | 97% |
Explains safety symbols and their meanings for proper handling and operation.
Details the inverter's layout, components, and key functionalities.
Provides detailed measurements of the inverter unit for installation planning.
Illustrates a typical system setup with connected components like PV, battery, and grid.
Itemizes package contents and guidelines for safe handling and transport.
Step-by-step guide on how to securely mount the inverter on a wall.
Lists recommended tools for successful and safe installation.
Detailed steps for safely connecting the battery to the inverter.
Explains the purpose and wiring for various communication and control ports.
Instructions for connecting the temperature sensor for lead-acid batteries.
Guidance on connecting the inverter to the grid and backup load safely.
Instructions for connecting PV modules, including selection and wire connection.
Details on connecting Current Transformers (CTs) and energy meters.
Mandatory earth grounding and optional WIFI connection setup.
Shows typical wiring configurations for grid-tied and backup modes.
Diagrams for diesel generator integration and parallel inverter setups.
Steps to turn the inverter on/off and understand the display panel.
Overview of the main screen, flow charts, and data display.
Access to menus for system, basic, battery, work mode, grid, and generator settings.
Procedures for advanced settings, self-checks, and device information.
Descriptions of basic, generator, smart load, and AC couple operating modes.
Lists common error codes and their corresponding troubleshooting steps.
Comprehensive technical specifications for the hybrid inverter models.
Details on RS485 port pinouts and CT dimensions.
Official document confirming compliance with relevant EU directives.
To Next Page