Need help?Do you have a question about the Deye SUN-6K-SG04LP1-EU-SM2 and is the answer not in the manual?
General| Model | SUN-6K-SG04LP1-EU-SM2 |
|---|---|
| Type | Hybrid Inverter |
| Rated Output Power | 6000 W |
| Max. DC Input Power | 7800W |
| Max DC Input Voltage | 500V |
| Nominal DC Input Voltage | 360 V |
| Start-up Voltage | 150 V |
| Number of MPPT | 2 |
| Strings per MPP Tracker | 1 |
| Max. Input Current per MPPT | 13A |
| Nominal AC Output Power | 6000 W |
| Max. AC Output Power | 6600 VA |
| AC Voltage Range | 180-280V |
| Nominal AC Frequency | 50/60Hz |
| THDi | <3% |
| AC Grid Connection Type | Single Phase |
| Battery Voltage Range | 40-60V |
| Efficiency | 97.6% |
| Weight | 22.5kg |
| Cooling Method | Smart Cooling |
| Protection Degree | IP65 |
| Communication | CAN/RS485 |
| Operating Temperature | -25°C to +60°C |
| MPPT Voltage Range | 125-425V |
| Nominal AC Voltage | 230V |
| Power Factor | 0.8 leading to 0.8 lagging |
| Battery Type | Lithium-ion |
| Protection Class | IP65 |
| Protection Level | IP65 |
Describes safety labels and symbols for safe operation.
Procedures and precautions for securing the inverter.
Steps and specifications for connecting the battery.
Instructions for AC grid and backup load wiring.
Guidelines for connecting PV modules to the inverter.
Mandatory grounding procedures for electrical safety.
Overall wiring diagrams for system configurations.
Configuration options for battery management.
Setting operational modes like selling or zero export.
Parameters for grid connection and protection.
Information needed for reporting and diagnosing faults.
Detailed table of fault codes and their fixes.
To Next Page