I
isabelfloresJul 25, 2025
What does it mean when my Deye Inverter has a grid failure?
- KKatherine HarrisJul 25, 2025
A red LED blinking three times indicates a grid failure.
To Next PageTo Next PageWhat does it mean when my Deye Inverter has a grid failure?
A red LED blinking three times indicates a grid failure.
General| Model | SUN1000G3-EU-230 |
|---|---|
| Max DC Input Power | 1300 W |
| Number of MPPTs | 1 |
| Rated AC Output Power | 1000 W |
| AC Output Power | 1000 W |
| AC Output Voltage | 230 V |
| AC Output Current | 4.35 A |
| Frequency | 50/60Hz |
| Grid Connection Type | Single-phase |
| Power Factor | >0.99 |
| THDI | <3% |
| Max Efficiency | 97.6% |
| Cooling Method | Natural convection |
| Protection Degree | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Communication | WiFi |
Key safety guidelines and warnings for installation and operation of the microinverter to prevent hazards.
Covers Start-LED and Operating LED indicators for system status and error identification.
Explains the GFDI-Error indication (red LED flashing four times) and its resolution.
Provides steps to diagnose issues with the microinverter itself or its communication with the network.
Step-by-step guide for safely disconnecting and removing a failed microinverter and installing a new one.
Guides through connecting the microinverter to a wireless network and configuring internet access.
Details on selecting and connecting to a wireless network for device communication.
Confirms successful configuration and initiates system restart for applied settings.
Covers confirming WiFi info, connecting to AP network, and automatic configuration for app access.
