Need help?Do you have a question about the Deye SUN-8K-G03 and is the answer not in the manual?
General| Model | SUN-8K-G03 |
|---|---|
| Rated Power | 8kW |
| Nominal AC Output Power | 8000 W |
| Max. Input Voltage | 1000 V |
| Max. PV Input Voltage | 1000 V |
| Number of MPP Trackers | 2 |
| Number of MPPTs | 2 |
| AC Voltage Range | 180-280V |
| Output Frequency | 50/60Hz |
| THDi | <3% |
| DC Switch | Yes |
| Operating Temperature Range | -25°C to +60°C |
| Operating Temperature | -25°C to +60°C |
| Protection Degree | IP65 |
| Protection Level | IP65 |
| Max. AC Output Power | 8800 W |
| Max. DC Input Power | 10400W |
| Max. PV Input Power | 10400W |
| Nominal AC Voltage | 230 V |
| Output Voltage | 230 V |
| Power Factor | >0.99 |
| AC Grid Frequency Range | 45 Hz - 55 Hz / 55 Hz - 65 Hz |
| Communication | RS485 |
Crucial guidelines for safe installation and operation of the inverter.
Procedure for connecting DC power from PV array to the inverter.
Procedure for connecting AC power to the inverter.
Step-by-step guide to powering on the inverter.
Step-by-step guide to powering off the inverter.
Wiring diagram for SUN limiter setup.
Procedure for connecting the SUN limiter to the inverter.
Configuration for zero export via SUN limiter.
Setup for zero export using an energy meter.
Configuration for zero export via energy meter.
Comprehensive list of error codes and their solutions.
To Next Page