Need help?Do you have a question about the Deye SUN-8K-SG05LP1-AU and is the answer not in the manual?
General| Model | SUN-8K-SG05LP1-AU |
|---|---|
| Type | Hybrid Inverter |
| Rated AC Output Power | 8000 W |
| Max. DC Input Power | 10400 W |
| Input Voltage Range | 125-550 V |
| Starting Voltage | 150 V |
| Number of MPPT Trackers | 2 |
| Max. Input Current per MPPT | 26A |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Rated Grid Frequency | 50/60Hz |
| THDi | <3% |
| DC Injection Current | <0.5% In |
| Switching Time | <10 ms |
| Battery Voltage Range | 40-60 V |
| Max. Charging Current | 190 A |
| Max. Discharging Current | 190 A |
| Max. Efficiency | 97.6% |
| Weight | 32 kg |
| Operating Temperature Range | -25°C to 60°C |
| Cooling Method | Natural Convection |
| Cooling | Fanless |
| Protection Degree | IP65 |
| Max. AC Output Power | 8800W |
| Power Factor | >0.99 |
| Battery Type | Lithium-ion |
| European Efficiency | 97.0% |
| Communication | RS485, Wi-Fi |
Key functionalities and capabilities of the hybrid inverter.
Guidelines for safely installing the inverter, including site selection and precautions.
Detailed steps and specifications for connecting the battery to the inverter.
Procedures for connecting the inverter to the grid and backup load.
Steps and considerations for connecting PV modules to the inverter.
Steps for powering the inverter on/off and understanding the display panel.
Accessing and configuring system, basic, battery, and work mode settings.
Procedures for grid connection, standard selection, and advanced grid parameter settings.
Listing common error codes, their descriptions, and troubleshooting solutions.
To Next Page