Need help?Do you have a question about the Deye SUN-8K-SG05LP1-EU and is the answer not in the manual?
General| Model | SUN-8K-SG05LP1-EU |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 8000 W |
| Max. DC Input Power | 10400 W |
| Starting Voltage | 150 V |
| Number of MPPT Trackers | 2 |
| Rated Output Power | 8000 W |
| Max. Charge/Discharge Power | 8000 W |
| Output Frequency | 50/60Hz |
| THDi | <3% |
| Peak Efficiency | 97.6% |
| Operating Temperature Range | -25°C to +60°C |
| Protection Class | IP65 |
| Topology | Transformerless |
| Input Voltage Range | 125-550 V |
| MPPT Voltage Range | 125 V - 550 V |
| Max. AC Output Power | 8 kW |
| Battery Voltage Range | 40 V - 60 V |
| Rated AC Voltage | 230 V |
| Output Voltage | 230 V |
| European Efficiency | 97% |
| Dimensions | 420 x 233 mm |
| Communication | RS485, WiFi |
Specifies site requirements and essential steps for securely mounting the inverter on a wall.
Details the process and requirements for connecting the battery to the inverter.
Outlines procedures for connecting the inverter to the grid and backup load.
Provides instructions for connecting photovoltaic modules to the inverter.
Shows different wiring configurations for grid-tied and backup modes.
Details battery mode selection, capacity, charging/discharging limits, and active battery features.
Describes various system operation modes like Selling First, Zero Export, and Load priority.
Details settings for grid mode, frequency, voltage, and connection types.
Guides on executing the CEI-021 standard self-check procedure including password entry.
Details advanced features like Arc Fault detection, System self-check, and Wind Turbine support.
Provides guidance on identifying and reporting inverter faults, including necessary information.
Lists common error codes, their descriptions, and suggested solutions for troubleshooting.
Continues the troubleshooting guide with more error codes and their corresponding solutions.
Presents detailed technical specifications for various models, including electrical and performance data.
Lists equipment protection features, operating conditions, and general inverter data.
To Next Page