Need help?Do you have a question about the Deye SUN-15K-G03 and is the answer not in the manual?
General| Model | SUN-15K-G03 |
|---|---|
| Rated Output Power | 15 kW |
| Max. DC Input Voltage | 1100 V |
| Max. PV Input Voltage | 1100 V |
| Start-up Voltage | 200 V |
| Number of MPP Trackers | 2 |
| Strings per MPP Tracker | 2 |
| Rated AC Output Power | 15 kW |
| AC Output Rated Current | 21.7A |
| Grid Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion (THD) | < 3% |
| Power Factor | 0.8 leading to 0.8 lagging |
| Max. Efficiency | 98.4% |
| Peak Efficiency | 98.4% |
| MPPT Efficiency | 99.9% |
| Protection Degree | IP65 |
| Protection Level | Class I |
| Max. DC Input Power | 20kW |
| Max. PV Input Power | 20kW |
| MPPT Voltage Range | 200V-1000V |
| Max. AC Output Power | 16.5kW |
| Nominal AC Voltage | 230V |
| AC Output Frequency Range | 50 Hz / 60 Hz |
| DC Current Injection | <0.5% of rated output |
| Operating Temperature Range | -25°C to 60°C |
Explains hazard symbols (Warning, Shock Hazard, High Temperature) for safe operation.
Critical safety rules for electrical installation, isolation, and handling the inverter.
Instructions for connecting DC input cables, polarity, and cable specifications.
Steps for connecting the AC output connector, including cable information and warnings.
Connecting Eastron and CHNT meters for zero-export, including RS485 communication.
Adjusting operational parameters for power modes, reactive power, and protections.
Configuring grid protection settings (e.g., over/under voltage, frequency) based on standards.
A comprehensive table listing error codes, their descriptions, and troubleshooting steps for fault resolution.
Detailed electrical parameters for DC input (voltage, current, MPPT) and AC output (voltage, current, power factor).
To Next Page