DHC BT1000 User Manual

14
WITH ACCESSORY LOADS
The system is showing normal output from the
alternator. No problem detected.
xx.xx V NORMAL
10.
Press «ENTER» when charging system test is
completed. Turn all accessory loads and
engine off. Press «ENTER» to read the system
test results.
TEST OVER. TURN
OFF LOADS &
ENGINE
ALT. LOAD VOLTS
xx.xx V
NORMAL
RIPPLE VOLTAGE
xx.xx V
NORMAL
11.
Press “ENTER” to press result or not.
CRANKING
VOLTAGE
xx.xx V
NORMAL
ALT. IDLE VOLTS
xx.x
x V
NORMAL
PRINT RESULT?
YES/
NO
IN-VEHIVLE TEST
This is a combination test of both battery test & system test. Please refer to
above testing procedures or follow the instructions on the display of the tester.
GLOSSARY
What is a GEL battery?
A gel battery is a lead-acid electric storage battery that:
Ɏ is sealed using special pressure valves and should never be opened.
Ɏ is completely maintenance-free.
Ɏ uses thixotropic gelled electrolyte.
14

DHC BT1000 Specifications

General

Brand	DHC
Model	BT1000
Category	Measuring Instruments
Language	English