What to do if there is no steam in Di4 Jet Pressing Facile Iron?
If your Di4 Iron isn't producing steam, or the steam output is weak, it might be due to an empty water tank. Make sure to fill the water tank. Also, the soleplate may not be hot enough; wait for it to heat up or increase its temperature.
Why is water leaking from my Di4 Jet Pressing Facile?
If water is leaking from the holes in the soleplate of your Di4 Iron, it could be because water has condensed in the pipes from infrequent use. Try pressing the steam trigger away from your ironing board until the iron produces steam. Alternatively, the soleplate might not be hot enough, so wait until it reaches the appropriate temperature or increase the temperature setting.
Why Di4 Jet Pressing Facile won't turn on?
If your Di4 Iron isn't heating up, steaming, and the power light isn't on, first ensure the unit is properly plugged into an electrical outlet. Also, check that the on/off switch is in the ON position.
General| Iron power | - W |
|---|---|
| Product color | Black, Blue |
| Soleplate type | Ceramic soleplate |
| Non-stick coating | Yes |
| Water tank capacity | 1.6 L |
| Maximum steam pressure | 4 bar |
| Steam boost performance | 150 g/min |
| Continuous steam performance | - g/min |
To Next Page
