Why does my Di4 Jet Pressing Infinity soleplate leave brown streaks?
The brown streaks from your Di4 Iron are likely due to using chemical descaling agents or additives in the water. Never add these types of products to the water tank or steam chamber.
What to do if water runs out of the holes in the soleplate of my Di4 Jet Pressing Infinity Iron?
To stop water from running out of the holes in the soleplate of your Di4 Iron, press the steam trigger away from your ironing board until the iron produces steam.
General| Iron power | - W |
|---|---|
| Product color | Grey, Purple, White |
| Soleplate type | Ceramic soleplate |
| Non-stick coating | Yes |
| Water tank capacity | 1.2 L |
| Maximum steam pressure | 5 bar |
| Steam boost performance | 250 g/min |
| Continuous steam performance | 120 g/min |
Guidelines on selecting the appropriate water type for the steam station.
Instructions for safely filling the water tank, including maximum level indication.
How to activate the steam boost feature for powerful steam bursts.
Practical advice for ironing different fabric types effectively.
A reference table for fabric care, temperature settings, and ironing methods.
Guidance on using the steam station for vertical garment steaming.
Procedure for refilling the water tank, including indicator lights.
Routine cleaning procedures for the steam station and its parts.
Instructions for activating and performing the self-cleaning cycle.
Steps for replacing the anti-scale cartridge to maintain performance.
Information on warranty coverage, claims, and authorized service.
To Next Page
