EasyManua.ls Logo

Diamond Audio Technology D5 300.4 User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LIMITED WARRANTY STATEMENT
Diamond Audio Technology, Inc. (DAT) warrants all DAT products to be
free of defects in material and workmanship for a period of one (1)
year from the date of original purchase provided they are purchased
from an authorized DAT retailer in the United States. However, the
effective warranty period will be three (3) years if the products were
purchased from and installed by an authorized DAT retailer.
What is covered: Parts and labor to effect repair or, at the sole
discretion of DAT, replacement of either any malfunctioning or
defective part(s) or the entire system should the system or any
component part(s) thereof fail to perform as designed. Includes return
freight via ground transportation to destinations within the United
States.
What is NOT covered: Installation or setup and repair or replacement of
the system or any parts thereof which, in DAT’s judgment, fail or
become damaged as a result of negligence, improper use, abuse,
unauthorized modification or service, improper or inadequate
packaging during shipment, installation by a non-authorized dealer,
accident, or use for any purpose other than those for which this
product was originally intended, or where the model’s serial number
has been removed, altered or defaced.
Who is covered: Original purchaser so long as they reside in the United
States and can provide proof of the original date of purchase (e.g.,
store receipt) from an authorized DAT retailer.
OUTSIDE THE UNITED STATES: Customers outside the United States
should contact their local sales office to obtain information on prices,
exchange unit availability, instructions, service and warranty/non-
warranty repairs.
Repair or replacement under this warranty is the exclusive remedy of
the consumer. DAT shall not be liable for any incidental or
consequential damages for breach of any expressed or implied
warranty on this product. Except to the extent prohibited by applicable
law, any implied warranty of merchantability or fitness for a particular
purpose on this product is limited in duration to the duration of this
warranty. Some states do not allow the exclusion or limitation of
incidental or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights and you
may also have other rights that may vary from state to state.
HOW TO OBTAIN WARRANTY SERVICE
In the event a DAT product should require servicing, you should (a) visit
an authorized DAT retailer or (b) call the DAT Service Dept. at (866) 328
2834. To be eligible for warranty service within a three (3) year period,
the accompanying receipt of original purchase from an authorized DAT
retailer must specifically note that dealer installation was provided.
Product returned for repair/service must be properly packaged and
clearly marked with the Return Authorization (RA) number issued by
DAT. If the RA number is not clearly marked on the package or no RA
number was issued by DAT, the product may be refused upon delivery.
DAT does not assume responsibility for lost or misdirected product.
Head Office
410 S. Benson Ln.
Chandler, AZ 85224
Tel: 480-813-6200
Fax: 480-813-6210
Service/ Tech Support
Toll Free 1-866-328-2834
tech@diamondaudio.com
www.diamondaudio.com
Passion Drives
the Soul
Rev 0 32002 © 2002 Diamond Audio Technology, Inc.
All rights Reserved. Features and specifications subject to change without prior notice.
Question and Answer IconNeed help?

Do you have a question about the Diamond Audio Technology D5 300.4 and is the answer not in the manual?

Diamond Audio Technology D5 300.4 Specifications

General IconGeneral
Channels4
RMS Power @ 4 Ohms75W x 4
RMS Power @ 2 Ohms100W x 4
RMS Power @ 4 Ohms Bridged200W x 2
Frequency Response20Hz - 20kHz
THD at Rated Power<0.05%
Signal to Noise Ratio>90dB
Crossover Frequency50Hz - 500Hz
Bass Boost0-12dB @ 45Hz
Fuse Rating30A
Input Sensitivity200mV - 4V
Crossover TypeHP/LP

Summary

Limited Warranty Statement

Obtaining Warranty Service

Outlines the procedure for obtaining warranty service and required documentation.

Amplifier Features and Specifications

Installation and Mounting

Power, Ground, and Remote Connections

Connection Importance

Explains the significance of proper power, ground, and remote connections for performance.

Electrical Connection Procedures

Power (+12V) Connection

Details the procedure for connecting the main +12V power cable.

Ground Connection

Outlines the process for establishing a secure ground connection for the amplifier.

Amplifier Power Management

Remote Turn-On Connection

Details how to connect the remote turn-on wire for amplifier activation.

Speaker Wiring and Bridging

Speaker Wiring Guidelines

Provides recommendations for speaker wire gauge and connection procedures.

RCA Input/Output Connections

Crossover and Gain Controls

Advanced Crossover Settings

Basic Troubleshooting Guide

No Output Troubleshooting

Guides on diagnosing lack of audio output and LED status.

Single Channel Issues

Provides steps to identify and fix single-channel audio problems.

Squealing and Volume Problems

Addresses squealing sounds and intermittent volume loss due to thermal protection.

Related product manuals