Diamond Multimedia WR300N - User Manual

WR300N
Portable Wireless-N Repeater
Quick Start Guide

Summary

About the Device

Minimum System Requirements

Package Contents

Device Overview

Front Panel

Bottom Panel

Tips for placing the Repeater

Configuring the Repeater

Web GUI Configuration Steps

Step-by-step instructions for configuring the WR300N using its web interface.

Using the WR300 N

Wireless Repeater Mode

Explains how to use the WR300N in repeater mode for extended wireless coverage.

Wireless Bridge Mode

Instructions on connecting wired devices to the wireless network using the WR300N.

Configure WR300 N as Wireless AP

Wireless Settings Management

Changing Wireless Settings

How to modify the wireless network name (SSID) and other wireless parameters.

Changing Wireless Security Settings

Procedures for updating wireless security modes and passphrases.

Wireless MAC Filtering

System Management

Accessing System Management

Firmware Management

Configuration Settings Management

Administrator Password Change

Setting a Static IP on your PC

Safety Precautions

Diamond Multimedia WR300N Specifications

General

Wireless Speed	Up to 300 Mbps
Frequency Band	2.4 GHz
Wireless Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% Non-Condensing
Storage Humidity	5% to 95% Non-Condensing
Wireless Standards	IEEE 802.11n
Ports	1 x 10/100M Ethernet Port
Antenna	2 x 5dBi external antennas
Modes	Repeater, Access Point
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 60°C