Diamond Y2-3 - Page 7

Instruction Manual
N.ºMNS00054.00
select Customized Cycle and press .
With the keys
and select the desired type Move the cursor with the keys
of cycleo (e.g.: Complete) and press .
Inside the Customized Cycle option configure the cycle by temperature or by
. Press .
time, using the keys
, the In PHASE 1, determine with the aid of the keys
temperatures and the duration. Press at the end of each option and then
move to the next phase.
Repeat the procedure of the PHASE 1 to customize the PHASE 2 and the PHASE 3
according with the required specifications.