To Next PageTo Next Page
Need help?Do you have a question about the Diaz Manu and is the answer not in the manual?
Details buttons like Up, Stop, Down, Channel, and Choose Channel on the remote control.
Identifies the programming button on the remote and motor for setup and configuration.
Directs users to troubleshooting section for motor response issues.
Explains how to connect the 230V AC, transformer, and motor for initial setup.
Details the steps for pairing the initial remote control with the motor.
Describes an alternative method for pairing the remote control with the motor.
Guide to setting the preferred upper and lower travel limits for the motor.
Instructions for adding or deleting extra remote controls for the motor.
Explains how to switch between roll and orientation modes for the motor.
Details on setting and recalling preferred blind positions.
How to verify and correct the motor's rotational direction.
Detailed steps for setting the upper and lower travel limits for the blind.
Steps to perform a factory reset on the motor, including prerequisites.
Instructions for re-pairing the remote if issues arise after a reset.
General