To Next PageTo Next Page
Need help?Do you have a question about the Dickey-John GAC500XT and is the answer not in the manual?
General| Accuracy | ±0.5% moisture content |
|---|---|
| Display | LCD |
| Grain Temperature Correction | Automatic |
| User Interface | Keypad |
| Weight | 1.5 lbs |
| Temperature Range | 32° to 122°F (0° to 50°C) |
| Calibration | User adjustable |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -4-140°F (-20-60°C) |
Identifies important safety messages in this manual, alerting to personal injury or death.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or equipment damage.
Provides a six-step procedure for performing a basic grain sample analysis using the unit.
Outlines the major features and capabilities of the GAC500XT, including memory, input methods, and connectivity.
Details supply voltage, frequency, and operating temperature ranges for the unit and grain.
Lists unit weight, shipping weight, and where to obtain grain calibration bulletins.
Instructions on how to safely remove the shipping screws before operating the unit.
Guidance on selecting a clean, level, and temperature-stable location for optimal measurement accuracy.
Explains how the unit connects to a DICKEY-john printer and the serial data format used for output.
Defines the function of each button on the switchpad, including Arrow, Enter, Escape, and Home buttons.
Allows the user to change the measurement units displayed by the GAC500XT.
Enables the user to select the display language for the GAC500XT interface.
Adjusts the LCD contrast on a scale of 1-10 for optimal screen visibility.
Sets or changes the access code required to modify the test weight bias settings.
Customizes which data points are displayed, such as radix point, output weight, and temperature.
Ensures correct grain selection and guides initial steps before performing moisture measurement.
Detailed instructions for filling the hopper and cell with grain for accurate measurement.
Displays the progress bar, final moisture, test weight, and temperature readings after measurement.
Guides the user on how to choose a different grain from the available list for analysis.
Details how to select and view calibration information for different grain types.
Instructions on how to change the name or label associated with a specific grain calibration.
Explains the process of entering the access code required to modify the test weight bias.
Describes how to update calibration values (K1-K9) which are published annually.
Details various cell tests including Null, 5KHz, 2MHz, Self Check, and Test Network for troubleshooting.
Explains how to perform and read the cell temperature test.
Guides the user through checking the weight of the empty cell and the loaded grain.
Tests the display and provides access to unit serial number, hardware, and software versions.
Provides detailed procedures for safely shipping and transporting the GAC500XT to prevent damage and voiding warranty.
Instructions for daily cleaning and general care of the GAC500XT unit to ensure reliable operation.
Provides detailed explanations of error codes, their probable causes, and corrective actions for troubleshooting.
Provides part numbers for the mobile and wall power adapters.
Outlines the warranty coverage, limitations, and conditions for DICKEY-john products.
