Dickson KT6P Manual V3
POWER
POWERPOWER
POWER
The KT6 operates on AC power with an optional 4AA battery backup. Depending on
chart rotation selected and model; battery backup will last approximately 3 days.
Note: Alarm and relays will not operate under battery only power.
LED Indicators
LED IndicatorsLED Indicators
LED Indicators
• AC Power with Battery Backup - Solid Green
• AC Power with Low Battery or No Battery - Blinks Red
• Battery Only - Blinks Green
• Battery Only (Low Battery) - Solid Red
PEN HOME ADJUST
PEN HOME ADJUSTPEN HOME ADJUST
PEN HOME ADJUST
If over time the pen location does not match the display, you may need to adjust the pen
location on the chart. A Pen Home Adjustment will not affect calibration of the sensor,
but rather corrects for the natural drift that occurs with mechanical moving parts over
time.
1. While the unit is on, press and hold both Pen Home
Pen HomePen Home
Pen Home and On/Off
On/OffOn/Off
On/Off
buttons until the
LED is solid green. Release the Pen Home
Pen HomePen Home
Pen Home and On/Off
On/OffOn/Off
On/Off buttons. The LED will
flash amber and green for one second then the LED will turn off.
Note:
Note:Note:
Note: Press Pen Home
Pen HomePen Home
Pen Home first so the unit will not turn off
2. The pen will move to the outer edge of the chart, and then the red
redred
red pen will move
to the outer chart ring (maximum temperature line).
3. If the red pen tip does not line up with the outer chart ring, use the Adjust
AdjustAdjust
Adjust-
--
-Up
UpUp
Up
and Adjust
AdjustAdjust
Adjust-
--
-
Down
DownDown
Down buttons (on the back of the unit) to move the red pen so that
the pen tip is on top of the outer chart ring.
4. Once set press On/Off
On/OffOn/Off
On/Off to save and exit Pen Home Adjust.
Note: Pressing the On/Off button will exit the adjustment and return the unit to normal
operation. Each time the Pen Home or On/Off button is pressed, the adjustment
currently in progress will be stored. The unit will take one minute to exit Pen Adjust
Mode once the On/Off button is pressed.
To Next Page
Loading...
