DieHard 200.71460 User Manual

SEA/RS
OWNER'S
MANUAL
Model No.
200.71460
CAUTION:
Read and Follow All Safety
Rules and Operating Instructions
Before Every Use of this Product.
h__
60/20/2 AMP
MANUAL BATTERY
CHARGER
250/125 AMP
ENGINE STARTER with
BATTERY TESTER
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

DieHard 200.71460 Specifications

General

Brand	DieHard
Model	200.71460
Type	Battery Charger
Input Voltage	120V AC
Battery Voltage	6V/12V
Engine Start	Yes
Microprocessor Controlled	Yes
Reverse Polarity Protection	Yes
Safety Features	Overcharge protection, Short circuit protection
Battery Type	Standard, AGM
Charging Time	Varies based on battery size and condition
Charging Amperage	2A/10A

Summary

Warranty Information

Important Safety Instructions

Product Parts Identification

Preparing Your Charger for Use

Assembling Your Charger

Instructions for fully assembling the battery charger before its initial use.

Plugging In The Charger

Guidance on connecting the charger's power cord to a grounded AC outlet.

Using An Extension Cord

Guidelines and recommendations for using an extension cord with the charger.

Preparing Battery For Charging

Essential steps and precautions before connecting the battery for charging.

Using Your Battery Charger

Setting The Controls

Explanation of how to set the charger's controls for optimal performance.

Voltmeter Operation

Instructions for using the voltmeter to check battery voltage and charging system.

Alternator/Generator Test

Procedure for testing the vehicle's charging system using the charger.

Battery Test Procedure

Procedure for testing the battery's condition using the charger's built-in meter.

Calculating Charge Time

Using Engine Start Feature

Maintenance And Care

Troubleshooting Common Problems