• 2 •
POWER INVERTER 750 PRODUCT FEATURES2.
BEFORE USING POWER INVERTER 7503.
It is important to know the continuous wattage of the device you plan to
use with the inverter. The Power Inverter 750 must be used with devices
drawing 750 watts or less. If the wattage is not marked on the device, an
estimate can be made by multiplying the AC input current (Amps) by the
AC voltage (110V).
Devices like TVs, fans and electric motors require additional power to start
(commonly known as the “starting or peak power”). The Power Inverter
750 can supply a momentary surge in wattage; however even devices
rated less than the maximum 750 watts can exceed the inverters surge
capability and cause an automatic overload shutdown.
Make sure the device you are using is compatible with a modied sine
wave inverter.
Battery Clamps
12V Accessory Plug
1. ON/OFF Button
2. Digital Display
3. LED Indicators
Voltage In
Voltage Out
Power Out
4. Two, 3-prong 110V
AC Outlets
5. Positive and Negative
Connector Knobs (not
shown)
6. USP Port (not shown)
To Next Page
Loading...
