Need help?Do you have a question about the Diehl IZAR PULSE i and is the answer not in the manual?
General| Pulse value | 1 pulse per liter |
|---|---|
| Protection class | IP68 |
| Interface | Pulse output |
| Cable length | 1.5 m |
| Power Supply | Battery |
| Data Logging | No |
IZAR PULSE i is a pulse emitter available in 3-wires or 4-wires, with a battery lifetime of up to 15 years.
IZAR PULSE i is compatible with Diehl Metering's modular range meters fitted with a grey ring or red for hot water.
Lists storage temperature (-20°C to +70°C), operating temperature (-15°C to +55°C), degree of protection (IP 68), and EMC.
IZAR PULSE i is available in «3-output», «4-output», «specific pulse weights» and «dry contact» versions.
Ensure IZAR PULSE i is compatible with the meter by checking the «Ti» or «Ha+Ti» marking.
Describes the 3 fastening hooks and a screw system for secure assembly and removal without damage.
Instructions for removing meter cover, cleaning the register, positioning the module, and pressing the ring.
Details the wiring for the 3-wire pulse emitter: White (Pulses), Green (Fraud/Cut-off), Brown (Ground).
Details wiring for 4-wire emitter: White (Pulses), Yellow (Direction), Green (Fraud/Cut-off), Brown (Ground).
To Next Page
