Need help?Do you have a question about the Dielectric TLP-8 and is the answer not in the manual?
General| Brand | Dielectric |
|---|---|
| Model | TLP-8 |
| Category | TV Antenna |
| Language | English |
Procedure for returning factory material requiring an MRA number.
Details on antenna assembly, testing, and tuning performed at the factory.
Overview of the Dielectric TLP Antenna's construction and corrosion resistance.
Instructions for inspecting crates for damage and verifying contents against a packing list.
Details on how antenna sections, feed lines, and mounts are packaged.
Key procedures including input section connection, O-rings, and conductor connections.
Importance of section numbering and match marking for correct antenna assembly.
Details on mounting hardware and critical safety warnings during installation.
Specific steps for assembling and orienting TLP-8 and TLP-16/24/32 models.
Procedures for checking the antenna system for leaks using dry nitrogen or air.
Reducing supply pressure after purge and monitoring for leaks.
Final checks before powering the system, ensuring gas tightness and proper installation.
Steps for purging the transmission line and antenna system with dry gas/air.
Instructions for starting up the system by applying transmitter signal.
Annual inspection of transmission lines and antenna system for routine maintenance.
Visual checks of transmission lines for damage, alignment, and hardware tightness.
References to various drawings and specifications for installation and mounting.
Recommended torque values for various hardware sizes and types used in assembly.
To Next Page