Start/Stop
Manual Run
Set Manual
Run
duration
Manual Run
The Manual Run screen allows for Manual Operation of the controller. It can be
reached by selecting the Manual Run button on the bottom right of the screen.
To manually run the controller, tap the button on the right of the screen. This but-
ton can also be used to stop any existing run. The default manual run time is for 5
minutes, this can be changed by tapping on the time and changing it.
The controller can also be manually run from the timer itself by pushing the button.
The duration of this manual run is equal to the duration of the scheduled program.
The button can also be used to end any watering.
To Next Page
Loading...
