10
Option 4 – Setting every X days:
Example: setting the timer to water every 10 days:
1. Press the button until the icon and the days of the week appear.
2. Press and to skip all the days of the week (underscore must be
removed beneath all days).
3. Press and EVEN appears flashing.
4. Press again and 1 hour appears flashing.
5. Press again and 1 DAY appears flashing. To select the number of days
between watering to 10 days, press until 10 appears on the display.
To set the timer back to specific days mode:
1. Push the button until – START EVERY and the icon appear at the bottom
left of the screen.
2. Push the
until the days of the week appear at the top of the screen.
Press the
button to proceed to the next step START TIME or to review
the program.
10
To Next Page
Loading...
Need help?
General