Need help?Do you have a question about the DIG RBC 8000 and is the answer not in the manual?
General| Brand | DIG |
|---|---|
| Model | RBC 8000 |
| Category | Control Unit |
| Language | English |
Identifies the timer cover, LCD display, programming keypad, and battery compartment.
Details the anti-siphon valve, solenoid, air vent, and manual flow control.
Describes pipe thread connections, solenoid wire, and rain sensor wire.
Defines icons for time, sensor status, watering, days, start times, run times, and rain delay.
Details the functions of each button for programming and operation.
Step-by-step guide for inserting AA batteries into the timer.
Instructions for connecting the valve to PVC pipe, including notes on pressure and placement.
Procedure to test the valve's operation after installation.
Explains general programming features and button usage for setting schedules.
Instructions for switching between 12/24 hour time display.
Detailed steps to set the hour and minute for the timer.
Procedure to set the month, day, and year, automatically updating the day of week.
Select individual days for watering, e.g., Tue, Thu, Sun.
Choose to water on even or odd numbered days of the month.
Set watering intervals from 1 to 12 hours between cycles.
Set watering intervals from 1 to 30 days between cycles.
Set up to four daily start times for irrigation cycles.
Procedure to remove a previously programmed start time.
Define how long the valve stays open for each watering cycle (1 min to 5 hr 59 min).
Temporarily suspend irrigation for 1 to 99 days due to rain.
Initiate watering for a specified duration using the timer controls.
Alternative methods to manually operate the valve using physical controls.
Guide to connecting a normally closed rain sensor to the timer.
Information on battery life and procedure for replacing batteries.
How to operate the valve manually if batteries are depleted.
Procedure to reset the timer to its factory default configuration.
Addresses issues like valve failure, incorrect timing, or blank display.
Solutions for valve installation, debris, flow control, sensor, and watering frequency problems.
Details the product warranty period, limitations, and exclusions.
Instructions on how to return the unit for repair or replacement under warranty.
Provides contact information for DIG's technical service in the USA and internationally.
Information on how to order replacement parts directly from DIG Corporation's website.
To Next Page