DIG RBC 8000 User Manual

2. If the current time has not been set or needs to be updated press and the
hour digit starts flashing.
3. To set the current hour, press or (note AM and PM designations).
4. To set the minutes, press again and the minute digit starts flashing. Press
the or to set the current time in minutes.
5. Repeat the steps to set the current date including, month, day and year. When
the date is selected and updated, the day of the week will be update at the
same time to correspond with the date.
MONTH DAY YEAR
6

DIG RBC 8000 Specifications

General

Brand	DIG
Model	RBC 8000
Category	Control Unit
Language	English