Need help?Do you have a question about the Digi-Sense 20250-20 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Probe Type | Stainless steel |
| Auto Power Off | Yes |
| Waterproof | No |
| Resolution | 0.1°C or 0.1°F |
| Cable Length | 1 meter (3.3 feet) |
Identifies and describes the meter's controls, display screen, and input connectors.
Procedure for connecting type K thermocouples and understanding input display behavior.
How to connect and use the optional infrared wand for noncontact measurements.
Overview of configurable options: Offset, Sample Rate, Time, Clear Memory, and Sleep Mode.
Using the offset option to compensate for thermocouple errors and improve accuracy.
Steps to clear the data logging memory and reset sample points.
Procedure to start and stop data recording using the meter's Rec/ button.
Steps to install software, connect meter, and configure data logging settings.
Procedure to download, view, save, and print recorded data from the software.
Specifies the temperature ranges for thermocouples and the display resolution.
Details the accuracy specifications for thermocouple and IR temperature measurements.
To Next Page
